Opta Minerals Inc. Logo

Home | English | Français    

E-Contact    

Opta Minerals Inc.About Opta Minerals Inc.whitelineOpta Minerals ProductswhitelineIndustries we servewhitelineGeneral Information about Hardness RangewhitelineOpta Investors RelationswhitelineContact Opta Minerals Inc.whitelineOpta Minerals Inc. Site mapabrasives Abrasives Foundry Recycling Water Jet Cutting Construction Water filtration Steel Mills Abrasives Foundry Recycling Water Jet Cutting Construction Water filtration Steel Mills
Download this page in pdf

Opta Minerals for all your Sand Product Needs:

abrasives

BENEFITS of
Bunker Sands
  • Less than 3% Silt and Clay
  • Hi-Quality Golf Sand
Abrasive Products
 

 

Bunker Sands

The golf industry, over the years, has become one of our important concerns. We supply the market with a high quality sand that meets the USGA recommendations.

Particle Size
USGA Guidelines
Temisca Sand
Very Coarse
Maximum 10%
2.0%
Course Medium
Total >65%
81.8%
Fine & Very Fine
Maximum 20%
14,3%
Total Sand
98.1%

Criteria for good bunker sand evaluation

Criteria
Temisca Sand
Silt and Clay <3% 1.8
Crusting Tendency None No Crusting Tendency
Fried Egg Lie Tendency <2.5g/cm3 - none 2.6g/cm3 - none
Particle Shape Angular - Sub-Angular Sub-Angular & Sub-Rounded
Acid Reaction Non-Calcareous Non-Calcareous
Colour Generally Whiter Sands preferred. White to Light Tan

According to Golf Course Management, the sands selected for bunkers should have less then 3% silt plus clay. Ball percentage studies indicated that sands requiring greater than 2.4g/cm3 were reported to have few fried egg lies. In some instances glare problems can occur with sands that are white, and it may be desirable to avoid one that reflects too much light.

Independent lab testing done by Standard Soil Consultants.

Highlights Temisca Bunker Sand has been used in over 100 golf courses including The Hamilton Golf and Country Club which hosted the Canadian Open in 2003 and 2006 and The Ridge at Manitou in Muskoka which has been voted the Best New Canadian Golf Course in 2006 by Golf Digest.

OPTA MINERALS has production and warehouse facilities in the following locations: Brantford, ON; Waterdown, ON; Lachine, QC; Laval, QC; St-Bruno-de-Guigues, QC; St-Germain-de-Grantham, QC; Norfolk, VA; New Orleans, LA; Los Angeles, CA; Hardeeville, SC; Attica, NY; Baltimore, MD; Keeseville, NY; Walkerton, IN; Milan, MI; Richfield, OH.


Copyright © 2008 Opta Minerals Inc. All rights reserved. E-mail:

 
Abrasives Foundry Recycling Water Jet Cutting Construction Water filtration Steel Mills